Free during early access · No credit card required
Load board aggregator + price suggestions for truck dispatchers
Every load. Your nearest truck. A bid ready to send.
Loady puts loads from your boards into one live feed, shows which of your trucks is closest to each pick-up, suggests a price and writes the email to the broker. You check it and hit send.
- No credit card
- You approve every bid
- Sent from your own Gmail
LoadyLoadsTotal: 1,290Auto-refresh: 30s
Log out
Loads
Total: 1,290Auto-refresh: 30s
EN
Posted
OriginFilter
DestinationFilter
EquipmentAll
Distance› mi
Capacity
ProviderFilter
Why Loady
Dispatching shouldn’t take six tools and a calculator
A good load is gone in minutes. While you switch tabs and do the math, another carrier sends the bid first. Loady keeps the whole routine on one screen.
Without Loady
- Four load board tabs, refreshed by hand
- A spreadsheet to remember where each truck is
- Google Maps to check how far the truck is from the pick-up
- A calculator for the rate per mile
- Copy-paste the same email to every broker
- Dig through the inbox to find who replied
With Loady
- One live feed with loads from all your boards
- Trucks nearby shown on every load, closest first
- Distance to pick-up already calculated
- A suggested price you can accept or change
- The email to the broker written from your template
- Replies come back to the bid, with the counter-price picked out
How it works
From a new load to a sent bid in three steps
Here is the same flow you saw in the demo, step by step.
Loads from the boards you work with land in one live feed. Duplicates posted on several boards show up once. Filter by equipment, lanes and pick-up date — new loads appear on top without refreshing.
14:41Fontana, CAPhoenix, AZ4/0/18 mi
14:40Las Vegas, NVDenver, CO2/0/41 mi
14:40Dallas, TXAtlanta, GA5/0/12 mi
14:39Laredo, TXMemphis, TN1/0/64 mi
14:38Cary, NCColumbus, OH3/1/22 mi
Open a load and Loady lists your trucks that fit, sorted by distance to the pick-up, with the driver and when the truck is free. No spreadsheet, no map tab.
Vehicles Nearby: 5
214 · LS · Mike R.Dallas, TX · Available now12 mi
187 · LS · Ana S.Irving, TX · Available now28 mi
233 · SS · Dave K.Fort Worth, TX · Free at 18:0046 mi
118 · LS · Tom B.Denton, TX · Free tomorrow 06:0061 mi
259 · SS · Rita G.Waco, TX · Available now74 mi
Loady suggests a price for the lane. Keep it or type your own. The email to the broker is filled in from your template and goes out from your own Gmail. When the broker answers, the reply is attached to the bid and you get a notification.
Bid placement for unit 214
Price$1950
Price per mile$2.50/mi
Email to broker
Broker email:dispatch@keystonecargo.example
LOAD DETAILSLOCATION: DALLAS, TX 75212
Rate: $1,950Miles Out: 12Dimensions: 26′ x 96″ x 96″Payload: 10,000 lbsEquipment: Liftgate, pallet jack
Offer valid for 15 minutes
14:41Fontana, CAPhoenix, AZ4/0/18 mi
14:40Las Vegas, NVDenver, CO2/0/41 mi
14:40Dallas, TXAtlanta, GA5/0/12 mi
14:39Laredo, TXMemphis, TN1/0/64 mi
14:38Cary, NCColumbus, OH3/1/22 mi
Vehicles Nearby: 5
214 · LS · Mike R.Dallas, TX · Available now12 mi
187 · LS · Ana S.Irving, TX · Available now28 mi
233 · SS · Dave K.Fort Worth, TX · Free at 18:0046 mi
118 · LS · Tom B.Denton, TX · Free tomorrow 06:0061 mi
259 · SS · Rita G.Waco, TX · Available now74 mi
Bid placement for unit 214
Price$1950
Price per mile$2.50/mi
Email to broker
Broker email:dispatch@keystonecargo.example
LOAD DETAILSLOCATION: DALLAS, TX 75212
Rate: $1,950Miles Out: 12Dimensions: 26′ x 96″ x 96″Payload: 10,000 lbsEquipment: Liftgate, pallet jack
Offer valid for 15 minutes
Features
Less clicking, more loads covered
Loady does the busywork around every bid, so you spend your time on the decisions only a dispatcher can make.
All your boards in one feed
One list instead of a tab per board. The same load posted twice shows up once.
Trucks matched by distance
Every load shows how many of your trucks fit and how far the nearest one is from the pick-up.
A price to start from
A suggested price for the lane in one click. It’s a starting point — you always set the final number.
Bids from your own Gmail
Connect your mailbox once. Brokers get the email from you, with your template and signature.
Replies you don’t miss
Broker answers are tied to the bid, the counter-price is picked out, and the team is notified right away.
Built for a dispatch team
Lead and dispatcher roles, a shared fleet, and each team sees only its own trucks and bids.
By the numbers
Built around one screen and one click
- feed for every board you work with
- 1
- steps from a new load to a sent bid
- 3
- to send the bid email to the broker
- 1 click
- of bids approved by you — nothing goes out on its own
- 100%
Pricing
Free while we’re in early access
Use every feature at no cost while we connect your boards and tune Loady to the way your team works.
Early access
$0for your whole team
- Unified load feed
- Truck matching by distance to pick-up
- Suggested prices
- Bid emails from your Gmail with your template
- Broker reply tracking and notifications
- Team roles and a shared fleet
After early access
Team pricing
We’ll announce plans before early access ends. There is no card on file, so nothing is ever charged automatically — you decide whether to stay.
Tell us about your operation →Fit check
Is Loady right for your team? Find out in 60 seconds
Tell us what you haul, how many trucks you dispatch and which boards you use. We’ll show how Loady fits and set up early access for you.
- Takes about 60 seconds
- See how Loady fits your boards and fleet
- We set up early access for your team
FAQ
Questions dispatchers ask us
Loady is a web app for truck dispatchers. It collects loads from your load boards into one feed, shows which of your trucks is closest to each pick-up, suggests a price and sends the bid email to the broker from your Gmail.
During early access we connect the boards your team already uses, one by one. Tell us which ones in the fit check and we’ll start with those.
No. Every bid is reviewed and sent by a dispatcher. Loady prepares the price and the email; you decide whether it goes out.
It’s based on the lane and the miles, and it’s meant as a starting point. You can always type your own price before sending.
Yours. Each dispatcher connects their own Gmail once, and bids go out from that mailbox with your template and signature. Broker replies come back to the same bid in Loady.
Yes. Create a team, invite dispatchers, and share one fleet. Leads manage the team; each team sees only its own trucks, drivers and bids.
Loady is free during early access, with no credit card required. We’ll announce team pricing before early access ends.
No. Loady runs in the browser — sign up, connect your mailbox, add your trucks and you’re ready.
The Loady app is in English, like the load boards and brokers you work with. This website is available in English, Russian and Romanian.
Send your next bid before the other carriers do
Free during early access. No credit card. Set up in minutes.